Hard Wood Floors

NEWLY-LAID HARD WOOD FLOORS, 3+ ROOMS
Because of advances in manufacturing techniques, and when the floor has been laid onto a good, level underlayment, it is usually possible to use just the fine-finishing machine and an edger. The edger is an insurance against ‘overwood’, which is the variation in height between any 2 boards, being more than about 1mm or so. This overwood can be rapidly removed by the edger.

The fine finishing machine can cope with up to about 1mm of overwood, but anything above 1mm needs the more aggressive edger to run along the juncture between the 2 boards before you clean up the floor with a fine finishing machine.

It is possible that a big machine will be needed, especially if there are more than a couple of rooms, to get it level. Included with the machine hire is a detailed “how-to” guide which will ensure you get the best result on newly-laid tongued and grooved floor.

For more information on ways in which to improve your pine floorboards please contact us on 0208 453 1160 or email us at websales@floorsanderhireuk.com

PRE FINISHED HARDWOOD FLOORS PACK, 1-2 ROOMS

For 10″ Endless Belt:
24 grit zirconia endless belt
40 grit zirconia endless belt
60 grit zirconia endless belt
120 grit zirconia endless belt

For VIKING Edger:
16 grit discs
40 grit discs
80 grit discs
120 grit discs

For Trio Fine Finisher:
40 grit discs
80 grit discs
120 grit discs

Please note: Packs are always supplied on a ‘Sale or Return’ basis

Tungsten scraper-for cleaning up behind radiator pipes and in corners
Ear protectors, supplied free
Valved PP2 dust masks x 2
Cellulose filler to mix with fine dust

Optional
Trio fine-finishing machine
Highly recommended for this floor type

VARNISH/OILS & ACCESSORIES OFFER
To take advantage of our varnish/oils discounts of 10% when bundled with the machine hire, these items must be ordered at the same time as the machines, or purchased when machines are delivered or collected.